Print Page | Close Window

schematic for passive crossover

Printed From: Speakerplans.com
Category: Plans
Forum Name: Po rn Horns
Forum Description: Discussion / Questions about the Po rn Horns
URL: https://forum.speakerplans.com/forum_posts.asp?TID=67290
Printed Date: 30 November 2022 at 4:02am
Software Version: Web Wiz Forums 12.05 - http://www.webwizforums.com


Topic: schematic for passive crossover
Posted By: tamuks
Subject: schematic for passive crossover
Date Posted: 23 May 2012 at 12:39pm
l need a comparison of diffrent mid and high settings and configs for passive crossover for horn loaded tops like these 260Hz going up any input is well apreciated



Replies:
Posted By: audiomik
Date Posted: 23 May 2012 at 3:16pm
Try here:
http://sound.westhost.com/lr-passive.htm" rel="nofollow - Passive Crossover Networks

Many other sites from a search on't the intelnet!

Mik

-------------
Warning! May contain Nuts
plus springs, washers, screws, etc, etc.


Posted By: tamuks
Date Posted: 23 May 2012 at 8:24pm
Originally posted by audiomik audiomik wrote:

Try here:
http://sound.westhost.com/lr-passive.htm" rel="nofollow - Passive Crossover Networks

Many other sites from a search on't the intelnet!

Mik
thanks now l can caculate what i need properly


Posted By: tamuks
Date Posted: 24 May 2012 at 4:28am
Originally posted by audiomik audiomik wrote:

Try here:
http://sound.westhost.com/lr-passive.htm" rel="nofollow - Passive Crossover Networks

Many other sites from a search on't the intelnet!

Mik
thanks very much



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.05 - http://www.webwizforums.com
Copyright ©2001-2022 Web Wiz Ltd. - https://www.webwiz.net