Print Page | Close Window

x1 whitch way up

Printed From:
Category: Plans
Forum Name: X1
Forum Description: Discussion / Questions about the X1 sub
Printed Date: 29 September 2023 at 1:50am
Software Version: Web Wiz Forums 12.06 -

Topic: x1 whitch way up
Posted By: martynjhall
Subject: x1 whitch way up
Date Posted: 05 October 2004 at 6:05pm

will the x1 perform ok with one port at the top and one at the bottem

i need it that way to get the high of the rest of my stack


Posted By: martynjhall
Date Posted: 05 October 2004 at 6:06pm

sorry about the spelling

Posted By: staiper
Date Posted: 05 October 2004 at 7:17pm
It is designed to stay on side .. so both ports must be by the floor.. anything else will affect the sound (in bad way).

Posted By: Mal X
Date Posted: 05 October 2004 at 9:20pm
i have 8 X1's and i can tell you it sounds a bit off with one port at the top and one at the bottom. As staiper says put both ports on the floor and all will be well.


Mal, how loud was that!!!!!!

Posted By: Andrew
Date Posted: 05 October 2004 at 10:25pm

So I guess if you want it higher, then add another X1?

Can a single X1 support two HD15 horns in terms of audio output?  If yes, is there plenty of reserve, like could I use the 120 driver instead of a 200 driver? 

Posted By: Mal X
Date Posted: 06 October 2004 at 10:20am
You got it thats what we did till we got our 15" horns, 2 X1's with an MT on top.

Depends where you cross it over, the size of the venue and how much power you are giving the driver in the X1. Go for the V18 1000 you will be so disapointed if you don't, it really is worth the extra cash, i will show you what i mean if you coming to the shootout.


Mal, how loud was that!!!!!!

Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 -
Copyright ©2001-2023 Web Wiz Ltd. -