Amp Forum - Peavey PV-4C Cutting out?

Print Page | Close Window

Peavey PV-4C Cutting out?

Printed From: Speakerplans.com
Category: General
Forum Name: Amp Forum
Forum Description: The 'Stopping Jake Fielder moaning constantly' forum description...
URL: https://forum.speakerplans.com/forum_posts.asp?TID=68482
Printed Date: 29 November 2023 at 7:41pm
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com

Topic: Peavey PV-4C Cutting out?

Posted By: Jake R
Subject: Peavey PV-4C Cutting out?
Date Posted: 30 June 2012 at 12:14am

Hi,

I have a Peavey PV-4C and it is being used as a monitor amp with two 16ohm HK Monitors wired in parallel and a 8ohm ALTO speaker. It keeps cutting out when being used- The DOT Active comes on for a sec and then the Green power LED goes off 2 secs later it comes back on. All sound is lost when this happened. It occurs a dozen times a show. Any ideas?

-------------
Thanks
Jake

Replies:

Posted By: Tan-2
Date Posted: 06 July 2012 at 8:02pm

The pair of 16 ohms speakers wired to 8 is fine, and the 8 ohm put on the other channel should work just as good..

just one thing, does the the amp cut off with no speakers connected? as it might be 'seeing a sort some where so try it with out a load..... amps some times cut out if there's a sort connection made some where..

You can down load the schematic on line to check things out or email peavey for it...