where buy horns
Printed From: Speakerplans.com
Category: Plans
Forum Name: Po rn Horns
Forum Description: Discussion / Questions about the Po rn Horns
URL: https://forum.speakerplans.com/forum_posts.asp?TID=68851
Printed Date: 29 September 2023 at 12:16am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: where buy horns
Posted By: th3n0x
Subject: where buy horns
Date Posted: 12 July 2012 at 1:53pm
|
Hi, firstly I apologize for my English, I help with google translators, and I do not know if the form is correct. I am interested to build a porn horn like what you see in the picture, but I can not find a site where I can buy a horn like that.  www.proaudioparts.co.uk is recommended but I can't open the site Some other website where I can find it? for open-air disco, where on play house and electro is indicated? How many do I need it for a good sound pressure? |
Replies:
Posted By: cravings
Date Posted: 13 July 2012 at 12:37am
|
hi, welcome translator is working well. i think the Porn Horn is no longer available. and the ProAudioParts shop was taken over by BlueAran. maybe look at Limmer Horns? http://speakerstore.nl sell them. thomann sell some too. |
Posted By: Adam_Iron_Horse
Date Posted: 13 July 2012 at 1:08am
| I believe mykey off the forum has a new substitute for the porn horn designed and made but not sure if its for sale yet may be worth an ask? |
Posted By: mykey-
Date Posted: 13 July 2012 at 1:30pm
|
Thanks Adam yes I have, it's called the SP12 I'll put some pictures up tomorrow for you ------------- BbbBBRAAAAPppBBBBbgushhhhhhhhssshhhhhGrAbRAAAAAAPPPPPp = Dubstep |
Posted By: th3n0x
Date Posted: 13 July 2012 at 2:45pm
Thanks man, with photos also add to the plans or you thinking of selling it? I have seen on speakerstore.nl the Hoorn Limmer 308 and for me, I think it is very expensive for a piece of plastic. At the same price I bought two speakers with an amplifier. Maybe porn horn is much louder than I have. But not being an expert I can not compare. For the uses I have mentioned could fit the porn horn or you suggest other project? |
mykey- wrote:Posted By: mykey-
Date Posted: 13 July 2012 at 3:03pm
|
Hi Th3 It's not just a piece of plastic (limmer 308) it's fibrglass too, and also has a comp horn. Add to that the R&D etc etc. This isn't instant crap injection moulded plastic. This piece of kit is the end of your chain, this is what produces the sound at the end of your equipment. If that don't sound good then there is no point in having XTA and Powersoft is there closest to what I have to offer (but please don't compare  ) is this @330 euro http://lsv-achenbach.de/shop/product_info.php?manufacturers_id=56&products_id=472&osCsid=6ea753212aa431f4bab8707084dbe21fprobably vat to add and I can't see a back bowl? Keep and eye out for the SP12 ------------- BbbBBRAAAAPppBBBBbgushhhhhhhhssshhhhhGrAbRAAAAAAPPPPPp = Dubstep |
Posted By: mykey-
Date Posted: 16 July 2012 at 2:24pm
   ------------- BbbBBRAAAAPppBBBBbgushhhhhhhhssshhhhhGrAbRAAAAAAPPPPPp = Dubstep |
Posted By: GUSTEK
Date Posted: 16 July 2012 at 2:45pm
Nice work Mykey  --NeXt LeVeL Bizzo... i think a few members on hear will be jumping off their chairs when they see these! thats a lot of glass... maybe make a boat out of them n sail it to Aus! lolDo you get past the 2k dip with pe32? ------------- -bun down babylon- |
Posted By: th3n0x
Date Posted: 16 July 2012 at 2:46pm
|
it is your SP12? are you going to open a topic with the project and steps to build it? raw material costs?
I'm sorry but here I still have much to learn, and the picture looked like plastic. However thanks for the information and I avoid thinking that they are thieves
|
Posted By: mykey-
Date Posted: 16 July 2012 at 2:47pm
12 layers of glass, 3 coats of paint ------------- BbbBBRAAAAPppBBBBbgushhhhhhhhssshhhhhGrAbRAAAAAAPPPPPp = Dubstep |
Posted By: cravings
Date Posted: 16 July 2012 at 2:58pm
|
is it hard to do horns with bolt holes in them? i'd be worried about cracking glaze or worst splitting the glass drilling them if i bought them. i've noticed the xtro fibreglass horns also don't seem to have pre drilled bolt holes. look lovely though [EMAIL= ][/EMAIL]  and i assume they come with back bowls. |
Posted By: mykey-
Date Posted: 16 July 2012 at 3:07pm
|
thanks Cravings trouble is with fibreglass horns, over a short time they shrink slightly. So if i told you the hole arrangement sizes, by the time they arrived at you, the holes would be out these are my new way of doing horns. No cutting and grinding. The SP12 pops out of the mould how you see it there. I would prefer to leave the hole making to the new owners. You won't have any problems with cracking....trust me ; ) ------------- BbbBBRAAAAPppBBBBbgushhhhhhhhssshhhhhGrAbRAAAAAAPPPPPp = Dubstep |
Posted By: mykey-
Date Posted: 16 July 2012 at 3:08pm
------------- BbbBBRAAAAPppBBBBbgushhhhhhhhssshhhhhGrAbRAAAAAAPPPPPp = Dubstep |
Posted By: mykey-
Date Posted: 16 July 2012 at 3:08pm
------------- BbbBBRAAAAPppBBBBbgushhhhhhhhssshhhhhGrAbRAAAAAAPPPPPp = Dubstep |
Posted By: GUSTEK
Date Posted: 16 July 2012 at 3:17pm
|
Would you use a dremel, angle grinder or hi speed drill with glass bit? i was thinking about cutting out a curve section on my double 8'' horn from you, to allow a overlap of my XT1085 horn.. this would look sweet and reduce height.. should i leave it? ------------- -bun down babylon- |
Posted By: mykey-
Date Posted: 16 July 2012 at 3:18pm
|
got a link to it?
------------- BbbBBRAAAAPppBBBBbgushhhhhhhhssshhhhhGrAbRAAAAAAPPPPPp = Dubstep |
Posted By: GUSTEK
Date Posted: 16 July 2012 at 3:23pm
|
a link to the 18sound? http://www.eighteensound.it/index.aspx?mainMenu=view_product_simple&pid=178 ------------- -bun down babylon- |
Posted By: GUSTEK
Date Posted: 16 July 2012 at 3:32pm
|
[QUOTE=mykey-]
Ad a Mykey special SP6.5 + 1'' on top stick a fork it its arse turn it over it's done! lol ------------- -bun down babylon- |
Posted By: mykey-
Date Posted: 16 July 2012 at 3:35pm
|
sounds like my new K1 mid top Gustek ; )
------------- BbbBBRAAAAPppBBBBbgushhhhhhhhssshhhhhGrAbRAAAAAAPPPPPp = Dubstep |
Posted By: mykey-
Date Posted: 16 July 2012 at 3:46pm
....and some more curves ------------- BbbBBRAAAAPppBBBBbgushhhhhhhhssshhhhhGrAbRAAAAAAPPPPPp = Dubstep |
Posted By: GUSTEK
Date Posted: 16 July 2012 at 3:57pm
|
Who needs PORN when you have SPHORN! ------------- -bun down babylon- |
Posted By: colossal sound
Date Posted: 02 April 2013 at 6:33pm
Hi mykey do you sell these horns? Because I desperately need some 8" horns and can't find anyone that sells them 
|
Posted By: Andy Kos
Date Posted: 04 April 2013 at 12:39am
|
8" horns seem a little problematic right now... ------------- just a guy with a warehouse and a few speakers... www.bluearan.co.uk |
Posted By: Second Hand PA Equip
Date Posted: 30 April 2013 at 1:03pm
| Still never heard these. Do they come up for sale very often? |