help with the baffels
Printed From: Speakerplans.com
Category: Plans
Forum Name: MT122
Forum Description: Discussion / Questions about the MT122
URL: https://forum.speakerplans.com/forum_posts.asp?TID=69120
Printed Date: 27 March 2026 at 7:52am
Software Version: Web Wiz Forums 12.08 - https://www.webwizforums.com
Topic: help with the baffels
Posted By: dj-cregi
Subject: help with the baffels
Date Posted: 19 July 2012 at 11:17pm
hello, i have now decided to finally get round to building something and have chose to build 2 tda style mt121's. but wanted to make sure i know exactly how to do everything before i start. i have worked out pretty much everything apart from if you look at the simplified plan it shows the 12mm thick side of the baffels. but one side is 360 and the other is 356.im guessing this is because of the shape of the box it has to get smaller. and it this achieved by doing a mitre cut? any help is massively appreciated. thanks
|
Replies:
Posted By: bee
Date Posted: 19 July 2012 at 11:25pm
| its an angle cut at 10 degrees..... on both sides |
Posted By: dj-cregi
Date Posted: 20 July 2012 at 1:29pm
|
and is that on both baffels? thanks for the help |
Posted By: smoore
Date Posted: 20 July 2012 at 2:22pm
| Yes both baffle |
Posted By: keilamym
Date Posted: 13 December 2014 at 4:33am
|
have you seen a single 15" plan for this? I'm trying to avoid running a kick bin and 12's won't go down low enough.. |
Posted By: all bass
Date Posted: 13 December 2014 at 7:01am
Something like the 15" section of the Selenium horns? http://hornplans.free.fr/pas1ma1.html" rel="nofollow - http://hornplans.free.fr/pas1ma1.html ------------- https://www.instagram.com/my_modular_journey/ |
keilamym wrote:Posted By: t.geessounds
Date Posted: 13 December 2014 at 9:58pm
| 15" section for that say 300 to 120 will your horn be about to go down to 300hz?? |