8" or 10" mid horn plans need
Printed From: Speakerplans.com
Category: Plans
Forum Name: New Projects Forum
Forum Description: Forum for new speakerplans projects, in memory of Tony Wilkes, 1953 - 2014
URL: https://forum.speakerplans.com/forum_posts.asp?TID=7217
Printed Date: 19 April 2024 at 10:30pm
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: 8" or 10" mid horn plans need
Posted By: ivan
Subject: 8" or 10" mid horn plans need
Date Posted: 09 November 2006 at 9:42am
I am trying to design mid horn with 8" or 10" driver but i don't quite understand everything in Hornresp program. I always get that Cir is smaller for something...And when i try to fix it it stays there, the error!? Then i found some Java platform calculator but it allso doesn't work. Just to mention that i have built speakers with software simulations bass refleks and other tipes which are ok. I have red meny, meny things about horn type speakers but the simulation is that i can not understand!  Are there any projects with this type, relatively small, drivers? I can see that usual minimum driver for mid is 12". And allmost forgot, i want mid with around 250Hz and up to 2-3Khz. |
Replies:
Posted By: Tom Umney
Date Posted: 09 November 2006 at 11:21am
|
Single 10 inch horn loaded?
http://zmatek.jinak.cz/diy/pbaudio/top_hornloaded_10-1/show_construction.asp.html - http://zmatek.jinak.cz/diy/pbaudio/top_hornloaded_10-1/show_construction.asp.html
Theres a 10 inch horn loaded design on that link. Use babelfish to translate the text as its not in english.
|
Posted By: Tekasis
Date Posted: 09 November 2006 at 3:57pm
|
babelfish ???
Never heard of it, but it's brilliant Toxic. Cheers.
|
Posted By: jethrocker
Date Posted: 09 November 2006 at 5:15pm
|
Also 8" section from xtro cab, but 350Hz upward only according to spec.
MT102, from the speakerplans site, not sure if that will hit 2KHz up top though?
|
Posted By: ivan
Date Posted: 10 November 2006 at 3:38am
|
Thanks Toxic! Something like that i was looking for! Another question: What kind of driver do i need for mid horn? I know only tha it needs low Qts, but not how low? |
Posted By: Tom Umney
Date Posted: 11 November 2006 at 8:04am
http://speakerplans.com/index.php?id=faq10 - http://speakerplans.com/index.php?id=faq10
|
ivan wrote:Posted By: ivan
Date Posted: 13 November 2006 at 3:36am
Thanks Toxic!  |