Lighting Talk - QTX HZ2/Chauvet Hurrican Haze 2

Print Page | Close Window

QTX HZ2/Chauvet Hurrican Haze 2 - No heat

Printed From: Speakerplans.com
Category: Other Chat
Forum Name: Lighting Talk
Forum Description: All your lampy, laser and 'other' special FX needs....
URL: https://forum.speakerplans.com/forum_posts.asp?TID=77794
Printed Date: 26 March 2026 at 10:04pm
Software Version: Web Wiz Forums 12.08 - https://www.webwizforums.com

Topic: QTX HZ2/Chauvet Hurrican Haze 2 - No heat

Posted By: norty303
Subject: QTX HZ2/Chauvet Hurrican Haze 2 - No heat
Date Posted: 07 April 2013 at 5:09pm

Ok, so one of my QTX hazers has stopped heating, and just spits fluid.

The LED's come on blue to say that it's ready to fog, and it does respond to the controller (it doesn't normally when warming up)

I'm thinking this may be a thermostat problem rather than the heater block itself.

Does this sound like a reasonable assumption?

What should I check to see if it is the thermostat? Should they be open or closed normally?

Also, assuming I might need to replace something, where is the best place for Chauvet/QTX spares?

-------------
My laser stuff: http://www.facebook.com/SubsonicSystems" rel="nofollow - Frikkin Lasers