HD 15 horn - hd 15 speakon plates?

Print Page | Close Window

hd 15 speakon plates?

Printed From: Speakerplans.com
Category: Plans
Forum Name: HD 15 horn
Forum Description: Discussion / Questions about the HD 15 horn
URL: https://forum.speakerplans.com/forum_posts.asp?TID=837
Printed Date: 27 March 2026 at 2:16am
Software Version: Web Wiz Forums 12.08 - https://www.webwizforums.com

Topic: hd 15 speakon plates?

Posted By: guyrave
Subject: hd 15 speakon plates?
Date Posted: 02 November 2004 at 7:09pm

im building some hd15s at the moment and want to no the best place to fit the speakon plate, any one thats built these before and can advise me that would be great

rave on!

Replies:

Posted By: loophole
Date Posted: 02 November 2004 at 7:37pm

on the back wall of the box, about 1/3 of the way up, is where i've found to work best. make sure the cable in the box is secured or it'll make a noise cos the driver fires right at it

Posted By: guyrave
Date Posted: 04 November 2004 at 10:01pm

cheers! i'm just anqious that the cone fires right at that side of the cab. i'm usin speakon plates as well as a pose to individual sockets so i'm worried that cuttin the plates in might effect the sound? not cut any holes yet so i'm still waiting. my idea was to put the plates behind the brace and staple the wires back 2 the cone?

Posted By: twinypaul
Date Posted: 25 November 2004 at 6:53pm

hi i have just built 4 hd15s and i fitted speakon dish behind the brace and used p clips down the corner but its very tight as theres not much room behind the brace ps havent fitted handles yet thinking of building wheel board

-------------
paul