Computer Talk - winisd

Print Page | Close Window

winisd

Printed From: Speakerplans.com
Category: Other Chat
Forum Name: Computer Talk
Forum Description: Help and discussion about your manly PC or girly Mac
URL: https://forum.speakerplans.com/forum_posts.asp?TID=86709
Printed Date: 04 October 2023 at 10:56am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com

Topic: winisd

Posted By: warrenstephenson
Subject: winisd
Date Posted: 09 May 2014 at 10:16pm

Can anyone send me or tell me were i can locate a version of winisd that i can use the box shape part in as the version on the web site does not allow this function to work

thanks warren

Replies:

Posted By: DMorison
Date Posted: 09 May 2014 at 11:09pm

I don't think any version ever had it working - I used 0.5 for a long time and it wasn't enabled in that, and 0.7 doesn't even make mention of it anywhere I can see.

To be honest, it's not that hard to work out box dimensions once you've got your design, so I can see why they dropped it.

HTH,

David.

Posted By: lgosdset
Date Posted: 09 May 2014 at 11:41pm

? you just put in the two dimensions you want, select your sheet thickness then double click the empty box and it gives you your third dimension.

Posted By: all bass
Date Posted: 10 May 2014 at 1:29am

Bassbox Pro will do dimensions. If I remember correctly it can even do some none square box calculations.

But as others have said before... It's not that hard with a little drawing and a calculator.

Posted By: bitSmasher
Date Posted: 10 May 2014 at 1:30am

It's easy enough to work backwards if you know your target volume. Keep in mind any box calculator needs to factor in driver volume, bracing, handles etc
You're better off learning to do all that manually
Divide litres by internal dimensions in metres as a guide
Ie, I'm working on a 100l box before I subtract 10l for all the above to tune it as 90l
Baffle is 45cm by 65cm internally
100L divided by 0.45, then by 0.65, gives me my depth of 34.1cm

All rough calcs for my purpose, but I'm still learning too