New XT8
Printed From: Speakerplans.com
Category: Plans
Forum Name: Punisher and X-tro
Forum Description: Discussion / Questions about the Punisher and X-tro
URL: https://forum.speakerplans.com/forum_posts.asp?TID=87224
Printed Date: 27 March 2026 at 4:53am
Software Version: Web Wiz Forums 12.08 - https://www.webwizforums.com
Topic: New XT8
Posted By: KidCreole
Subject: New XT8
Date Posted: 13 June 2014 at 9:23am
|
New Mk2 Different (smoother) flare rate Thicker wooden phase bung gasket Lighter phase bung (foam filled) Wider side mounting flanges    ------------- Mykey Wattco |
Replies:
Posted By: audiomik
Date Posted: 13 June 2014 at 10:15am
|
Mikey how about an on-axis sinewave sweep with distortion and polar plots of performance for your product please Mik ------------- Warning! May contain Nuts plus springs, washers, screws, etc, etc. |
Posted By: KidCreole
Date Posted: 13 June 2014 at 10:46am
OK
------------- Mykey Wattco |
Posted By: minaximal
Date Posted: 13 June 2014 at 11:58am
I think you uploaded the wrong off axis sweep? ------------- Subs + Barges = :) http://www.metaacoustics.com" rel="nofollow - www.metaacoustics.com |
KidCreole wrote:Posted By: burningbush
Date Posted: 13 June 2014 at 12:42pm
Boom boom,  ------------- music is the message |
Posted By: ceharden
Date Posted: 13 June 2014 at 6:45pm
|
What dispersion angles is it? My main complaint with the previous one was the dispersion got very narrow above about 1.5kHz, I assume this one addresses that issue with a more conical expansion? |
Posted By: discosucks
Date Posted: 13 June 2014 at 9:46pm
|
Nice! What is there operating range?
|
Posted By: bee
Date Posted: 19 June 2014 at 11:04pm
|
the fiberglass work looks spot on... ------------- https://www.elements-audio.com |