Print Page | Close Window


Printed From:
Category: Plans
Forum Name: X10, X12, X15 and XM15
Forum Description: Discussion / Questions about the X10, X12, X15 and XM15
Printed Date: 14 August 2022 at 4:46pm
Software Version: Web Wiz Forums 12.05 -

Topic: insulation
Posted By: SelectaRon
Subject: insulation
Date Posted: 30 January 2015 at 12:52am
Is there supposed to be any insulation/dampening inside of an x15? I dont think so but just checking to make sure :)

Posted By: dlyxover
Date Posted: 30 January 2015 at 2:05am
I would but not insulation, its nasty stuff. 
You don't really want the fibres pumping out you're box.

I use this stuff" rel="nofollow -

line inside the cab maybe a second layer round the 15".
Use a staple gun to hold it in place 

In the Truth there is no news, and in the News there is no truth

Posted By: SelectaRon
Date Posted: 30 January 2015 at 2:41am
thanks for the reply! 

Posted By: SelectaRon
Date Posted: 31 January 2015 at 12:02am
ok so i was wrong lol, definitely dampen inside the cab.. bottom to within 2" or so of the back of the port, the back wall and one side... dont forget to weather strip between the cab and the drivers and the input plate on the back.
Did a side by side test with one cab treated and the other raw - the difference was night and day

Posted By: markie
Date Posted: 04 February 2015 at 2:30pm
That polyester wadding is fine but it's expensive. Much cheaper to use home insulation and I have said this many times on the forum.:-

Don't use fibreglass or rockwool insulation or the one made from re-cycled GLASS bottles. The fibres are not healthy for either drivers or lungs.

If you use the insulation made from recycled PLASTIC bottles it's fine. Doesn't make fibres, is non itch  and does the job a treat for about a fiver a roll. This stuff is white like the polyester.

If it's got wheels or tits it's gonna cost a fortune

Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.05 -
Copyright ©2001-2022 Web Wiz Ltd. -