8" 10" 12" drivers that work with phase bungs
Printed From: Speakerplans.com
Category: Plans
Forum Name: Po rn Horns
Forum Description: Discussion / Questions about the Po rn Horns
URL: https://forum.speakerplans.com/forum_posts.asp?TID=90798
Printed Date: 29 September 2023 at 1:00am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: 8" 10" 12" drivers that work with phase bungs
Posted By: TRE4U2NV
Subject: 8" 10" 12" drivers that work with phase bungs
Date Posted: 17 February 2015 at 1:44am
|
most drivers i know when googled dont show phase bung capability IE can get a bolt through the center of driver is there a driver source for dwg or dwx files for these drivers as trawling the net it giving me little or no results or anyone willing to share there favourites studio 10" were mine and volts 10" anymore that i should check out 8" preferably but others welcomed cheers  ------------- IM SO SECRETIVE BUT I CANT TELL YOU WHY |
Replies:
Posted By: TRE4U2NV
Date Posted: 01 March 2015 at 4:18am
nobody  ------------- IM SO SECRETIVE BUT I CANT TELL YOU WHY |
Posted By: PavelP
Date Posted: 01 March 2015 at 1:58pm
| You need not only center bolt but some textile hanging between phase plug and cone to protect air gap. |
Posted By: TRE4U2NV
Date Posted: 02 March 2015 at 12:30am
|
most times pavel ive bought kef refoaming centres to do this amongst others ------------- IM SO SECRETIVE BUT I CANT TELL YOU WHY |
Posted By: PavelP
Date Posted: 03 March 2015 at 11:25pm
| Have you some pictures? |
Posted By: TRE4U2NV
Date Posted: 04 March 2015 at 5:38pm
|
not that i can think of will have a look on my previous phone ------------- IM SO SECRETIVE BUT I CANT TELL YOU WHY |