Print Page | Close Window

crossover settings

Printed From: Speakerplans.com
Category: Plans
Forum Name: Punisher and X-tro
Forum Description: Discussion / Questions about the Punisher and X-tro
URL: https://forum.speakerplans.com/forum_posts.asp?TID=93649
Printed Date: 29 March 2024 at 4:01pm
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: crossover settings
Posted By: munkey
Subject: crossover settings
Date Posted: 22 October 2015 at 9:48pm
What do people recommend? I've been told lr24 @ 30hz with lr48 @90hz. I have also been told butterworth24 @ 40hz with butterworth24 @90hz.
This is for a stack of 6-8. We will have 12 loaded soon

Thoughts and opinions please


-------------
the midtops!



Replies:
Posted By: el chupacabra
Date Posted: 22 October 2015 at 10:24pm
It's been a long time since I've run punishers but never went below 40hz and mostly at 45, especially when using 4 or less. Not sure what filters.


Posted By: toastyghost
Date Posted: 22 October 2015 at 10:33pm
I measured a system recently of 3 punishes and 1 xtro per side and was happy with the results albeit in a venue install. Sadly I didn't save the settings myself but I can ask the owner if he can export them.

I'll be honest. The xtro is hard work. Especially where the 15 meets the 8.


Posted By: munkey
Date Posted: 24 October 2015 at 1:50am
thanks, any help or guidance will be gratefully received. Btw, we're not using extro's. We're running stable audio kmt v1's. Its mainly the crossover points and curves, for the punisher, that i'm interested in. Tbh, I could do with some one that know how to use smaart and is relativity close to me. I know that it changes in every venue, etc, but would give me a much better starting point than guess work and word of mouth.

Many thanks


-------------
the midtops!


Posted By: Dutchman
Date Posted: 15 November 2015 at 5:27pm
There is a spec sheet somewhere on internet about punisher xtro settings, search on google.
I would never run the puns lower than 35hz 48dB lr. When using 2 or 3 cabs in one stack set 40hz as hpf.

-------------
We need more SPL!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net