Wich driver/box
Printed From: Speakerplans.com
Category: Plans
Forum Name: Ported Enclosures
Forum Description: Post all your reflex and bandpass and 'other' boxes with holes in stuff here...
URL: https://forum.speakerplans.com/forum_posts.asp?TID=95947
Printed Date: 27 March 2026 at 10:58am
Software Version: Web Wiz Forums 12.08 - https://www.webwizforums.com
Topic: Wich driver/box
Posted By: Seehnav
Subject: Wich driver/box
Date Posted: 07 June 2016 at 8:05am
|
Hi everybody , I'm thinking of building the 184 subwoofer with the PD 184. I want to use them for about 300 people , indoor , concrete walls, hard floor. (building 4 pieces) or is this plan outdated ? There are also al lot of plans with the RCF LF18g401 driver but I was wondering why RCF drivers need 900w AES and the PD184 only 600w? Also if i look at the fane and b&c drivers , they're also like 1000watts AES? I want to hook up 4 cabs on 1 Amp. Budget for the driver , between 200 a 270 driver.... Also need to cut it out 1 plank (at the local woodshop , the planks are bout 122 @ 305 cm) Cabs i've build: Cubo 15 B&C sub 18 (sell them because they needed 1200w AES) Tham 12 Personal choice : I like that deep warm bass , Drum&bass / reggae type , musical bass type  Thansk in Advance |
Replies:
Posted By: Crashpc
Date Posted: 10 June 2016 at 2:49pm
|
There is no need of the speaker for 1200w, and no real consequence to it when you don't deliver this power to the speaker. It is just free choice on top. If you liked the sound of BC subs, get it again.... ------------- Nikon and Canon people should not be married to each other. Why did you let this happen? |