Print Page | Close Window

Turbosound Aspect Processing

Printed From: Speakerplans.com
Category: General
Forum Name: General Forum
Forum Description: Open Discussion / Questions
URL: https://forum.speakerplans.com/forum_posts.asp?TID=98317
Printed Date: 29 March 2024 at 4:58am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: Turbosound Aspect Processing
Posted By: corell
Subject: Turbosound Aspect Processing
Date Posted: 16 April 2017 at 12:58pm
Im picking up 6 x TA 880H next week and before i write an email to them, i just wanted to check if any of you have the recommended DSP settings for them available and could share them with me.
Datasheets only mention the x-over but no high shelving etc...

Thanks in advance and happy easter to you!



Replies:
Posted By: Teunos
Date Posted: 16 April 2017 at 2:03pm
Old ones from kierewiet?

-------------
Best regards,
Teun.


Posted By: toastyghost
Date Posted: 16 April 2017 at 4:13pm
https://www.dropbox.com/s/cf9q9h1yx7zukmn/dsp.xls?dl=0" rel="nofollow - https://www.dropbox.com/s/cf9q9h1yx7zukmn/dsp.xls?dl=0

That's the last document they posted. If you aren't using a Linea Research or Lake DSP or the MC2 amps then please pay careful attention to the 'using 3rd party amplifiers' bit as well as the notes on gain structure - I would recommend obtaining a copy of the full Aspect manual as it's actually really good.


Posted By: corell
Date Posted: 18 April 2017 at 1:19pm
So they dont use any EQ on the top? Hard to believe if you look at the mid driver response...
Am i missing someting?


Posted By: toastyghost
Date Posted: 18 April 2017 at 1:40pm
Officially no, nor does Flood/Flash or F1 on paper. But they say to EQ to suit the venue of course. Get the full aspect manual it has more info.


Posted By: nks
Date Posted: 18 March 2022 at 10:25pm
Hello

Can someone repost the TA-880H DSP settings please? The link that was posted earlier on this thread doesn't work anymore.

Thanks
Nico


Posted By: jacethebase
Date Posted: 19 March 2022 at 6:26pm
Are the settings not written on the input plate like most turbo boxes?

-------------
www.wedding-production.co.uk

www.stage2sound.com


Posted By: nks
Date Posted: 19 March 2022 at 8:44pm
Possibly.....I've been asked to help a friend tuning his rig sometimes this week and I wanted to get there prepared...not sure what's written on the box

I think I found what I need anyway:  http://i.imgur.com/P5zEQT5" rel="nofollow - http://i.imgur.com/P5zEQT5

Thanks
 



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net