Studiomaster Powerhouse 12-2
Printed From: Speakerplans.com
Category: General
Forum Name: Electro Frying Forum
Forum Description: Talk about drivers, processors and mixers
URL: https://forum.speakerplans.com/forum_posts.asp?TID=99243
Printed Date: 18 April 2024 at 5:37pm
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: Studiomaster Powerhouse 12-2
Posted By: kedwardsleisure
Subject: Studiomaster Powerhouse 12-2
Date Posted: 13 September 2017 at 12:58pm
|
Hi folks, looking for a circuit diagram for one of these vintage mixers if anyone could oblige please? Studiomaster Powerhouse 12-2  ------------- Kevin North Staffordshire |
Replies:
Posted By: APW
Date Posted: 13 September 2017 at 9:13pm
|
Hi Kevin. What is the issue with it, is it the mixer or the amp? I don’t have the exact schematic for that exact mixer, but I
do have several from that vintage and as most of circuitry on the boards is
fairly generic between modals you are more than welcome to have what I have. If you are interested let me know and I’ll zip them up and send them over, just PM me your email address. Best Alan |
Posted By: kedwardsleisure
Date Posted: 13 September 2017 at 9:59pm
|
Hi alan, it's the digital reverb not working, the rest of it is fine. I found an open circuit reverb fader and a capacitor on the reverb board with the leg rotted off. None of which made the slightest bit of difference. I'll PM my email  ------------- Kevin North Staffordshire |
Posted By: Bishopsound
Date Posted: 14 September 2017 at 3:52pm
|
Hi Alan When I owned Carlsbro we had a few of these into repair but i no longer have the drawings. Suggest you try and get hold of Mailk. Give John Roberts a call on +44 (0)7966 13 31 39 as I am sure he can find what you need or put you in contact with Malik. Hope this helps Andrew www.bishopsound.com
|