Are these 1850 horns right for this subbass use? |
Post Reply | Page 12> |
Author | |
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
Posted: 14 February 2023 at 2:24pm |
Reviving another zombie thread !! What is your intended music type/crowd max size !? Seeing as you are posting here, won't suggest a Scoop perfect for the 1850, but would suggest 186 Horn. |
|
Global Depopulation - Alive and Killing.
|
|
Vaso_Bobinata
Registered User Joined: 21 May 2017 Location: Sofia BUL Status: Offline Points: 37 |
Post Options
Thanks(0)
|
Hi mate i was wondering what to do with 8 PD1850/1 drivers. (left from a club upgrade)
1850 horn nothing below 50Hz X1 nothing over 100Hz (X1 very fast and easy to buld) not very all purpose designs :) WTF Any susgestions? Kind regards, V
|
|
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
|
As mentioned previously, Absolutely not !!!! If Reggae/DnB is not your main music material played, and you want sub section for general purpose use, stack of 4x 186 Horns, with Void V18-1000, PD1850, and with 4x ES18 Kick bins will meet your sub and kick section needs. If decent sub reproduction is also needed for Reggae/DnB, SuperScooper 18s loaded with Void V18-1000, and ES18 kick bins, will do a decent job, especially on bass heavy material. ES18s with strong 9mm Xmax driver, will really excel, 70-160hz, depending on driver. |
|
Global Depopulation - Alive and Killing.
|
|
Jo bg
Young Croc Joined: 08 March 2017 Status: Offline Points: 552 |
Post Options
Thanks(0)
|
Is this for reggae or other genres? if allready stated, sorry…
if you are not playing mainly reggae i would look also at hogs, if you like a similar form factor, or consider reflex or tapped horns, should cope better with more genres and play real subbass as you asked; scoops, and also hogs, don't do so much sub, particularly when you have only 2. if you use scoops or hogs, a lot of people use hd15 or es18 as kicks, smaller than 186 horns and efficent where you need it, while being smaller and easier to carry store and stack. It would be wiser, even if you don't build it entirely now, to plan your mid tops allready so you can choose the right kick section, or share what you have already. looking at the system as a Whole and setting a clear target could avoid some mistakes and expenses . Edited by Jo bg - 20 November 2018 at 3:27pm |
|
bassego
Registered User Joined: 13 November 2018 Status: Offline Points: 19 |
Post Options
Thanks(0)
|
Thanks for all this answers!! Step by step youre throwing light in this darkness of ignorance.
I have an idea that IMO could work, as is something ive seen in a lot of sound system gigs. So this is my idea: 1. Start by constructing x2 18" super scoops and lowpass them at about... 70hz?? (ive read the "Why i dont like scoops" on the page FAQ and basically what's saying is that at this frequency to 90hz and higher has a large dip in frequency response, so i think it will be a nice idea to filter out this frequencies) 2. Then build x2 186 horns and place on top of the scoops, laying down for compensating the frequency cut. I personally think my idea will work but before making this large investment i would like to hear your opinions to contrast these personal opinions with my beloved acoustic scientists
Edited by bassego - 19 November 2018 at 10:37pm |
|
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
|
Agreed. From what I hear SBH does not give natural 45hz prominence, as 186 horn, which is strange from what is supposed to be superior design.
|
|
Global Depopulation - Alive and Killing.
|
|
pfly
Old Croc Joined: 25 October 2007 Location: Helsinki, Fin Status: Offline Points: 2828 |
Post Options
Thanks(0)
|
I hear nice strong 45Hz out of them easily. 40Hz starts to be lacking. For the stuff we love that 35-45Hz is reaaally important tho :)
|
|
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
|
I've said it before here.. I've heard 2x stacks of 4x 1850 horns, powered by 2x Crest CA18s, on 3Phase power, and 20M back, I could not perceive anything below, what I deemed 50hz. Whether measuring would have stated otherwise is pointless, as people go to gigs to hear sound, not look at measurements. In same venue, I used 6x 1850 Scoops, driven by 2x CA18s, and the 40hz was so over powering, to the point, I was told to turn the sub amps down. Subjective, non scientific, but point was, people at 2nd gig, told me system, was much better than the 1st.
|
|
Global Depopulation - Alive and Killing.
|
|
Father-Francis
Old Croc Joined: 24 October 2007 Location: Kenya ,Denmark Status: Offline Points: 2760 |
Post Options
Thanks(0)
|
I think 2006 we did the same got 43hz outside with 4 of them too, also with the V1000 , I think the V1000 is a pretty good driver , now we’v Moved to 21” for subs, playing around with the PND2450 box if Br is H1700mm*W666*D930 or horn 1750*666*640 ,
|
|
Music is the strongest form of magic.(+45 31879997)blakmanpro@gmail.com, foa@sweetboxaudio.dk
|
|
pfly
Old Croc Joined: 25 October 2007 Location: Helsinki, Fin Status: Offline Points: 2828 |
Post Options
Thanks(0)
|
Years and years ago I measured stack of four 1850 horns with V18-1000s in them. I did it outside several meters from closest wall. Mic was something like 2 meters from the stack at maybe knee level. +-3dB was 43-200Hz
Edited by pfly - 17 November 2018 at 6:31pm |
|
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
|
Wondering why no one has made version of 186 Horn 1200mm tall... But then again, I've heard 21" Folded horns that couldn't do 50hz. Maybe WSX is a better choice, if compression could be lowered. Edited by levyte357- - 17 November 2018 at 6:13pm |
|
Global Depopulation - Alive and Killing.
|
|
levyte357-
Old Croc Joined: 27 July 2012 Location: UK, South East Status: Offline Points: 8128 |
Post Options
Thanks(0)
|
The designer said 1850 Horn is a 50hz box. The 186 Horn, with a modern 10mm Xmax, decent BL driver, like V18-1000, Oberton 18XB1600 should easily reach 45hz in pairs, with RIGHT AMP.
|
|
Global Depopulation - Alive and Killing.
|
|
Post Reply | Page 12> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |