![]() |
2x 10" or 2x 8" |
Post Reply ![]() |
Page 12> |
Author | ||
LjudLahger ![]() Young Croc ![]() Joined: 31 July 2008 Location: Sweden Status: Offline Points: 838 |
![]() ![]() ![]() ![]() ![]() Posted: 01 April 2023 at 4:38pm |
|
I think B&C DE10 sound crap.
|
||
![]() |
||
smitske96 ![]() Young Croc ![]() Joined: 16 February 2016 Location: The Netherlands Status: Offline Points: 1009 |
![]() ![]() ![]() ![]() ![]() |
|
Well, you said the H19040P is to big, so why sell the whole combo? The 250 is still an excellent comb with a good horn. Maybe look at the P-audio PH220/RCF H100. Both very nice 1" horns.
|
||
![]() |
||
BatteryLow ![]() Registered User ![]() ![]() Joined: 14 January 2023 Status: Offline Points: 17 |
![]() ![]() ![]() ![]() ![]() |
|
Well I have the Celestion H19040P as I read in the forum it is one of the best for the DE250, and it just cost 20€ and not 80€, not willing to spend that much on horns being such a beginner I'm considering this one too https://www.beyma.com/speakers/Fichas_Tecnicas/beyma-speakers-data-sheet-horn-TD8060.pdf It says it's fine till 1,5khz, so it could be good, just that I read that people using horns like B&C ME10 was a very bad choice Will probably open a post asking for possible "tiny" horns for DE250
|
||
![]() |
||
smitske96 ![]() Young Croc ![]() Joined: 16 February 2016 Location: The Netherlands Status: Offline Points: 1009 |
![]() ![]() ![]() ![]() ![]() |
|
Why not buy different horns for the de250?
|
||
![]() |
||
BatteryLow ![]() Registered User ![]() ![]() Joined: 14 January 2023 Status: Offline Points: 17 |
![]() ![]() ![]() ![]() ![]() |
|
Plan is to have the single 15" up to like 180hz or so, then 2x8" Fane Sovereign Pro 8-225 (bought them today) and 2x1" For the 1"s, I have measured my trunk opening and the most probable thing is that I have to resell the 2x new DE250 and horns xD, because the horns are 320x190mm and that is too much for the opening of the trunk. I will most probably buy 2x DE10 with tiny 140x140mm horns, or maybe I will try these ones https://www.beyma.com/en/products/c/compression-driver/1SMC8060N8/motor-smc-8060-n-8-oh/ They look good on paper and have a very low crossover for the price, like at 1.5khz, the DE10 is minimum 2,5khz This is the DSP I'm gonna be using https://www.stetsom.com.br/en/produto/stx2848/ This is the amp https://www.audiodesign.de/renegade/english/RXA1500.html At 8ohm it should be more or less half the RMS, I'm ok with such a "tiny" amp at first
Edited by BatteryLow - 26 January 2023 at 2:05pm |
||
![]() |
||
smitske96 ![]() Young Croc ![]() Joined: 16 February 2016 Location: The Netherlands Status: Offline Points: 1009 |
![]() ![]() ![]() ![]() ![]() |
|
I have read it wrong, thought you wanted to use two DE250 per top cabinet. With LF driver I mean the 8" or 10". DE250 paired with a 8 or 10" driver should work perfectly. I personally use the RCF MB8N251 +DE360 in my smal top cabinets which will be paired with a single 15" or 18" sub. So also in your case, should work fine. However, I do not have any experience with the listed drivers. What are you going to use to drive it al (amps, crossovers/dsp etc)?
|
||
![]() |
||
BatteryLow ![]() Registered User ![]() ![]() Joined: 14 January 2023 Status: Offline Points: 17 |
![]() ![]() ![]() ![]() ![]() |
|
Yeah i cannot fit 2 LF 15" so I'm going with one sub, I read somewhere in this forum that some experienced people say 15/8/1 doesnt work but I think they talk about having 2x of each and not just one sub like in my case.
|
||
![]() |
||
JamesH ![]() Registered User ![]() Joined: 24 August 2022 Status: Offline Points: 55 |
![]() ![]() ![]() ![]() ![]() |
|
With two 8"s or two 10"s |
||
![]() |
||
BatteryLow ![]() Registered User ![]() ![]() Joined: 14 January 2023 Status: Offline Points: 17 |
![]() ![]() ![]() ![]() ![]() |
|
I don't understand, which ones are the LF drivers and what do you exactly want to mean
|
||
![]() |
||
BatteryLow ![]() Registered User ![]() ![]() Joined: 14 January 2023 Status: Offline Points: 17 |
![]() ![]() ![]() ![]() ![]() |
|
Edit: deleted
Edited by BatteryLow - 25 January 2023 at 3:56pm |
||
![]() |
||
smitske96 ![]() Young Croc ![]() Joined: 16 February 2016 Location: The Netherlands Status: Offline Points: 1009 |
![]() ![]() ![]() ![]() ![]() |
|
How are you planning on using 2x DE250 with 2 LF drivers?
|
||
![]() |
||
BatteryLow ![]() Registered User ![]() ![]() Joined: 14 January 2023 Status: Offline Points: 17 |
![]() ![]() ![]() ![]() ![]() |
|
To add: 1x15/2x10/2x1 vs 1x15/2x8/2x1 is what I'm asking I suppose
|
||
![]() |
Post Reply ![]() |
Page 12> |
Tweet |
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |