|
Fullrange speaker |
Post Reply 
|
Page 12> |
| Author | ||
Panoramix 
Registered User 
Joined: 13 January 2014 Location: france Status: Offline Points: 48 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: Fullrange speakerPosted: 09 February 2014 at 12:15pm |
|
|
Hi,
Does anybody have a good full range reflex design ? something like x15(or even a single 12"+ 1,4" on a cdh) but with actual driver ? need to be passive. Frequency response should be 60/70hz to 18khz, but will be used mainly 80/90hz up(with a half Gsub under them)...but sometimes need it can be used alone for dj speaker. |
||
 |
||
|
Panoramix
Registered User
Joined: 13 January 2014 Location: france Status: Offline Points: 48 |
Post Options
Thanks(0)
Quote Reply
Posted: 11 February 2014 at 11:49am |
|
|
UPP ?
|
||
|
||
|
imageoven
Old Croc 
Joined: 28 March 2007 Location: Scotland Status: Offline Points: 2199 |
Post Options
Thanks(0)
Quote Reply
Posted: 11 February 2014 at 12:25pm |
|
What does this mean? Why not the plans you list? or do you mean you want to buy? |
||
|
Keep pushing on, things are gonna get better.
|
||
|
||
|
Panoramix
Registered User
Joined: 13 January 2014 Location: france Status: Offline Points: 48 |
Post Options
Thanks(0)
Quote Reply
Posted: 11 February 2014 at 1:09pm |
|
|
actual driver mean driver that i can actually buy...not discontinued ones like the ones on the plan.
|
||
|
||
|
Meat
Old Croc
Joined: 05 June 2009 Location: Manc Status: Offline Points: 1513 |
Post Options
Thanks(0)
Quote Reply
Posted: 11 February 2014 at 3:06pm |
|
|
Yeah, using BMS and a Faital 1.4".
|
||
|
Don't test the champignon sound
|
||
|
||
|
Panoramix
Registered User
Joined: 13 January 2014 Location: france Status: Offline Points: 48 |
Post Options
Thanks(0)
Quote Reply
Posted: 11 February 2014 at 4:16pm |
|
Wich one from BMS ? same for the comp ? and did you made it ? did you modified the filter to suit this new drivers ? how does it sound ? i don't look specially for a x15, but i don't want to go from scratch here(specially because of the passive filter) that's why i look for a approuved design that's work with to much tweaking. |
||
|
||
|
DMorison
Old Croc
Joined: 14 March 2007 Location: Aberdeen Status: Offline Points: 1740 |
Post Options
Thanks(0)
Quote Reply
Posted: 11 February 2014 at 7:59pm |
|
|
18 Sound and Beyma both have recommended designs for current drivers that include passive crossover schematics. Cheers, David. |
||
|
||
|
Meat
Old Croc
Joined: 05 June 2009 Location: Manc Status: Offline Points: 1513 |
Post Options
Thanks(0)
Quote Reply
Posted: 11 February 2014 at 8:31pm |
|
|
Its BMS 12N620 and Faital HF144. No crossover, active crossover needed.
|
||
|
Don't test the champignon sound
|
||
|
||
|
Panoramix
Registered User
Joined: 13 January 2014 Location: france Status: Offline Points: 48 |
Post Options
Thanks(0)
Quote Reply
Posted: 12 February 2014 at 10:43am |
|
i don't want go active, this system need to work with only 2amp, one for the sub, one for the tops.
i have see that ones but are somebody tested them here ? and the driver price from their design(beyma, i hadn't look the 18sound ones) aren't really cheap but yeah if i don't found another design i will think about them. |
||
|
||
|
corell
Young Croc 
Joined: 19 August 2013 Location: Berlin Status: Offline Points: 1159 |
Post Options
Thanks(0)
Quote Reply
Posted: 12 February 2014 at 11:23am |
|
|
http://www.jobst-audio.de/public-address/m-serie/114-jm-sat12
http://www.jobst-audio.de/public-address/m-serie/116-jm-sat15 |
||
|
||
|
Panoramix
Registered User
Joined: 13 January 2014 Location: france Status: Offline Points: 48 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 February 2014 at 12:04pm |
|
|
Hi,
look very nice but i can't dowload the complete plan, the link is not complete on their website. do you have moree info about it ? look bloody similar to the one i'm looking actually, chilltone15" that use a B&C 15NW76, a B&CDE250 on a RCF H64 horn. and there have a cheaper 15" driver that is the beyma 15MI100 with the same DE250 on a RCF H100horn. |
||
|
||
|
corell
Young Croc
Joined: 19 August 2013 Location: Berlin Status: Offline Points: 1159 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 February 2014 at 1:16pm |
|
|
you have to buy the passive x-over or the whole kit to get the plan at the higher class products (like m range).
the jm sat 15 can handle a eq of +10db between 50-80Hz for fulllrange usage if you set a low cut. but they are very carefully designed and jobst is one of germanys leading DIY websites. xovers are 200€ for a pair, kit is about 1060€ for a pair. Edited by corell - 13 February 2014 at 1:26pm |
||
|
||
|
Post Reply
|
Page 12> |
| Tweet |
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
Panoramix wrote: