|
William Cowan's Horn |
Post Reply 
|
Page 12> |
| Author | |
dj-panoramix 
Registered User 
Joined: 28 September 2005 Location: France Status: Offline Points: 462 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: William Cowan's HornPosted: 18 September 2009 at 12:43am |
|
i just found an interesting horn on his websites, it's look like it had been designed for a dual 10inch driver, and he make a modification for a single 15" fane driver, fane 15xb:
 here is the plan but remember that the plan is for the dual 10" driver and the closed part must be bigger for using with the fane driver(have a look to the link i post on the end of this thread, the guy gives some explanation about the modification), you have to get about 60L VRC:
 here is a simulation with the fane 15XB vs wsx with 18P300,the 2box in 0,5PI(i used the input parameter from his website, so you have to check if good):
 black is fane, grey is wsx
here are the hornresp input parameter(i didn't chek them):
 here's the link from the designer, with some explanations about the modification and original design:
Edited by dj-panoramix - 18 September 2009 at 12:51am |
|
 |
|
|
Centauri
Old Croc 
Joined: 29 November 2004 Location: Newcastle Aus Status: Offline Points: 1792 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 September 2009 at 1:25am |
|
There are a couple of errors in this simulation....
First, the second conical section is not 84cm long and should be more like 50. Secondly, The fourth section of flare in the sim needs to be removed completely - you CANNOT try to include the walls/floor as a horn section AND model eighth space as well, its one or the other. William has been chipped on this many times before... The size of the room the sub is used in will introduce "cabin gain" at the low end, and the amount will depend entirely on the room - a measured increase in low end compared to the sims with the box in position has nothing to do with any increased performance of the box, but everything to do with the room it is in. |
|
|
|
|
dj-panoramix
Registered User
Joined: 28 September 2005 Location: France Status: Offline Points: 462 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 September 2009 at 12:40pm |
|
ok as i said before i didn't check it(thanks for doing it), here's a simulation with last section removed and 2nd con value to 50:
grey wsx, black fane15XB
Edited by dj-panoramix - 18 September 2009 at 12:59pm |
|
|
|
|
kiriiz
Registered User
Joined: 09 January 2009 Status: Offline Points: 70 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 September 2009 at 12:45pm |
 so flat! |
|
|
|
|
dj-panoramix
Registered User
Joined: 28 September 2005 Location: France Status: Offline Points: 462 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 September 2009 at 1:10pm |
|
yes really flat, i'm just trying to play with hornresp to get a little beat more lowend, but i'm really not an expert so maybe it will not be better after...
anybody know a good cad program but freeware ? Edited by dj-panoramix - 18 September 2009 at 1:17pm |
|
|
|
|
kiriiz
Registered User
Joined: 09 January 2009 Status: Offline Points: 70 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 September 2009 at 5:12pm |
|
700x600x560 can fit in my car...
 interesting...How classic horns sounds in such a small space? |
|
|
|
|
dj-panoramix
Registered User
Joined: 28 September 2005 Location: France Status: Offline Points: 462 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 September 2009 at 7:24pm |
|
never try a horn in a car so can't tell, but in little space horn are not the best sounding...in car my favourit is closed box for sound quality, and vented when you need some extra db.
|
|
|
|
|
KenTech
Registered User
Joined: 05 December 2006 Status: Offline Points: 133 |
Post Options
Thanks(0)
Quote Reply
Posted: 15 October 2009 at 10:30pm |
|
had anybody tried this Horn ? will it sound better if i put a 18" there? ofcourse, rissing the cab with a few cm.. like 15 cm maybe.
|
|
|
|
|
dj-panoramix
Registered User
Joined: 28 September 2005 Location: France Status: Offline Points: 462 |
Post Options
Thanks(0)
Quote Reply
Posted: 16 October 2009 at 2:05pm |
|
to know if it will sound better, you have to try...
on simulation i get similar results with a 18woofer with modification of the S's values, but that will do the box much bigger for the same result, not interesting at all.
and when i used a 18woofer with same parameter it give big dip and peak:
 |
|
|
|
|
JDCutta
Registered User
Joined: 24 June 2010 Location: North Lincs Status: Offline Points: 555 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 August 2010 at 4:43am |
|
Has anyone built the 15'' version of this? Any way of modifying the design to get it playing lower, does any one know what the spl would be in open space?
|
|
|
|
|
matteom
New Member 
Joined: 21 October 2008 Status: Offline Points: 2 |
Post Options
Thanks(0)
Quote Reply
Posted: 13 August 2010 at 11:43am |
|
my horn:
 |
|
|
|
|
JDCutta
Registered User
Joined: 24 June 2010 Location: North Lincs Status: Offline Points: 555 |
Post Options
Thanks(0)
Quote Reply
Posted: 14 August 2010 at 12:07am |
|
any more details on your horn mate?
|
|
|
|
|
Post Reply
|
Page 12> |
| Tweet |
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
dj-panoramix wrote: