inuke 6000

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I bought a NU6000 and do not have the crossover putting out any low freq. Has any one ran in to this issue?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
PDH Members Profile Send Private Message Find Members Posts Add to Buddy List New Member Joined: 14 March 2014 Status: Offline Points: 5	Post Options Post Reply Quote PDH Report Post Thanks(0) Quote Reply Topic: inuke 6000 Posted: 20 March 2014 at 2:28pm
	I bought a NU6000 and do not have the crossover putting out any low freq. Has any one ran in to this issue?

discosucks Members Profile Send Private Message Find Members Posts Add to Buddy List Old Croc Joined: 06 November 2009 Status: Offline Points: 1546	Post Options Post Reply Quote discosucks Report Post Thanks(0) Quote Reply Posted: 20 March 2014 at 2:34pm
	You will have to expand on your question .

patryk1305 Members Profile Send Private Message Find Members Posts Add to Buddy List Registered User Joined: 13 December 2012 Location: United Kingdom Status: Offline Points: 488	Post Options Post Reply Quote patryk1305 Report Post Thanks(0) Quote Reply Posted: 20 March 2014 at 2:54pm
	I think he means the amp is not putting out any lows? I assume its a 6000DSP version. Did you buy it new or used? If used then maybe someone had it set up to power mid tops Edited by patryk1305 - 20 March 2014 at 2:55pm

Goodvibetribe Members Profile Send Private Message Find Members Posts Add to Buddy List Young Croc Joined: 06 December 2011 Location: Cardiff Status: Offline Points: 951	Post Options Post Reply Quote Goodvibetribe Report Post Thanks(0) Quote Reply Posted: 20 March 2014 at 3:01pm
	Have you even contacted Berry about this yet?
	George c - www.gorilla-audio.co.uk facebook.com/gorillaaudiohire

Dub Specialist Sound Members Profile Send Private Message Find Members Posts Add to Buddy List Old Croc Joined: 15 November 2013 Location: Smethwick Status: Offline Points: 4871	Post Options Post Reply Quote Dub Specialist Sound Report Post Thanks(0) Quote Reply Posted: 20 March 2014 at 3:06pm
	And how do you do that with them dont know the amps really , have thay got dip switch's ? internal x/o?
	Musical Roots Reggae Vibration is Life! for music is sound...sound is vibration...vibration is energy... and energy begets life. Therein lies my passion!...MUSIC IS LIFE...

PDH Members Profile Send Private Message Find Members Posts Add to Buddy List New Member Joined: 14 March 2014 Status: Offline Points: 5	Post Options Post Reply Quote PDH Report Post Thanks(0) Quote Reply Posted: 20 March 2014 at 3:08pm
	This is a new unit. I set my input with two XLR from my mixer board to the A/B amp inputs on the amp. Set the stereo/mono swithch to stereo and the full range/crossover switch to crossover. manual says 1ooHz and below outputs from channel B. That is not happening. I am still getting full range with the switch in either position. Bi-amp diagram shows 1+and1- is for top cabs and 2+and2- is for sub freq. rewired a spekon connector to the 2+2-to 1/4" configuiration and the channel had no output. I am using a two wire spekon to 1/4" for my outputs. Confusing with the biamp configure pic on the A channel. The way the manual reads the amp should have output A for tops and B output for subs but that is not what I am getting.

oldskool Members Profile Send Private Message Find Members Posts Add to Buddy List Old Croc Joined: 04 October 2010 Location: Essex Status: Offline Points: 2097	Post Options Post Reply Quote oldskool Report Post Thanks(0) Quote Reply Posted: 20 March 2014 at 3:37pm
	Would this not be better off in the newbie discussions rather than the advanced?
	Politics is the art of looking for trouble, finding it everywhere, diagnosing it incorrectly and applying the wrong remedies

Requiem Members Profile Send Private Message Find Members Posts Add to Buddy List Old Croc Joined: 20 January 2011 Location: Bristol Status: Offline Points: 1808	Post Options Post Reply Quote Requiem Report Post Thanks(0) Quote Reply Posted: 20 March 2014 at 4:22pm
	Set it to full range then use an active crossover inbetween, the built in ones are shabby anyway
	www.requiem-soundsystem.com Custom Martin Audio WSX, USB & CSG Soundsystem based in Bristol

PDH Members Profile Send Private Message Find Members Posts Add to Buddy List New Member Joined: 14 March 2014 Status: Offline Points: 5	Post Options Post Reply Quote PDH Report Post Thanks(0) Quote Reply Posted: 20 March 2014 at 4:34pm
	I have a crossover and it will work that way, allready tested that, Will have to use that for now. Cannot get any solid answers from the factory or the retailer. Back to old school! Thanks to all for the replies.

kedwardsleisure Members Profile Send Private Message Find Members Posts Add to Buddy List Old Croc Joined: 20 January 2009 Location: Staffordshire Status: Offline Points: 5157	Post Options Post Reply Quote kedwardsleisure Report Post Thanks(0) Quote Reply Posted: 20 March 2014 at 6:45pm
	If you're connecting a sub to output speakon ChB you should be wiring to +1 -1 The +2 -2 is if you want to bi-amp a single speaker with a 4-core speakon lead in which case you use ChA outlet. This is explained on the back of the amp panel.
	Kevin North Staffordshire

PDH Members Profile Send Private Message Find Members Posts Add to Buddy List New Member Joined: 14 March 2014 Status: Offline Points: 5	Post Options Post Reply Quote PDH Report Post Thanks(0) Quote Reply Posted: 20 March 2014 at 6:58pm
	Yes that is on my list, Thank you. I am going to use A input in mono with the crossover switch on and see if that works. Thanks for the reply! I do have an external crossover to use but trying to cut back a little equipment on the stage. I hope that this amp will respond as I expect. thanks again!

Swampgas Members Profile Send Private Message Find Members Posts Add to Buddy List New Member Joined: 09 August 2014 Location: Alabama Status: Offline Points: 4	Post Options Post Reply Quote Swampgas Report Post Thanks(0) Quote Reply Posted: 25 August 2014 at 10:53pm
	Hello, I recently purchased a 6000DSP. My plan was to Bi-amp using the internal crossover (subs in channel A/Highs in channel B) with 2 pole Speakon cables but it didn't work in BiAMP 1. If you do that in BiAMP 2 it works great! I ran my setup all day in 100 degree weather, in the sun without a wimper. Edited by Swampgas - 25 August 2014 at 11:02pm