|
X15 cut list |
Post Reply 
|
| Author | |
mailk 
New Member 
Joined: 09 June 2015 Status: Offline Points: 5 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: X15 cut listPosted: 09 June 2015 at 11:43am |
|
I wanted to build this cabinet, but i couldn't find the cut list for it.
So i decided to make my own and share it if someone needs it: (I built it myselft with theese plans.) 18mm thick material.  Back panel:   Front panel:   Inner panels:     Side panels(x2):   Top-Bottom panels:  Edited by mailk - 17 June 2015 at 9:05am |
|
 |
|
|
mini-mad
Old Croc 
Joined: 13 July 2012 Location: london Status: Offline Points: 6861 |
Post Options
Thanks(0)
Quote Reply
Posted: 09 June 2015 at 12:20pm |
|
..aaaaaaaaand the recommended drivers for YOUR cab?
|
|
|
If it sounds like a gorilla is trying to escape, turn it down.
|
|
|
|
|
mailk
New Member
Joined: 09 June 2015 Status: Offline Points: 5 |
Post Options
Thanks(0)
Quote Reply
Posted: 09 June 2015 at 12:32pm |
|
http://www.speakerplans.com/index.php?id=x15
|
|
|
|
|
DMorison
Old Croc
Joined: 14 March 2007 Location: Aberdeen Status: Offline Points: 1740 |
Post Options
Thanks(0)
Quote Reply
Posted: 09 June 2015 at 7:29pm |
First up, thanks for sharing - so many people just come and ask for stuff so it's good to see someone doing it the other way round  Mini-mad's point is that the original drivers haven't been available for several years, so unless you're very lucky and find a replacement with very similar T/S parameters, then at least one panel (the port shelf) will need to be different to ensure the right tuning for whatever driver you do end up using. (The current P.Audio series of drivers with similar model names to the originals have very different parameters so should not be trusted to work as-is.) HTH, David.
Edited by DMorison - 09 June 2015 at 7:32pm |
|
|
|
|
mini-mad
Old Croc
Joined: 13 July 2012 Location: london Status: Offline Points: 6861 |
Post Options
Thanks(0)
Quote Reply
Posted: 09 June 2015 at 7:50pm |
|
...cheers! what he said
 |
|
|
If it sounds like a gorilla is trying to escape, turn it down.
|
|
|
|
|
mailk
New Member
Joined: 09 June 2015 Status: Offline Points: 5 |
Post Options
Thanks(0)
Quote Reply
Posted: 11 June 2015 at 1:57pm |
|
I just had two cheapo speakers lying around for years and i wanted to do something with them, so i started to search for a plan.
I found the x-15 and i started to play with it and the speakers in WinISD. It seemed to fit quite well. (ofc. you have to adjust the port frequency) They sound decent enough. So i cant really recomend drivers for it. It seems my drivers are out of production as well. old ones...
|
|
|
|
|
DMorison
Old Croc
Joined: 14 March 2007 Location: Aberdeen Status: Offline Points: 1740 |
Post Options
Thanks(0)
Quote Reply
Posted: 12 June 2015 at 12:32pm |
Then it's all good, thanks for sharing.
|
|
|
|
|
ali4994
Registered User 
Joined: 11 August 2016 Location: Leeds Status: Offline Points: 24 |
Post Options
Thanks(0)
Quote Reply
Posted: 17 August 2016 at 11:02pm |
|
Did you cut from standard sheets of 244x122? If so, how many sheets do you need for one cab? Or even how many cabs out of one sheet, should that be the case
|
|
|
|
|
Post Reply
|
|
| Tweet |
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
mailk wrote: