Print Page | Close Window

DYNACORD SUB800A upgrade?

Printed From: Speakerplans.com
Category: Plans
Forum Name: Ported Enclosures
Forum Description: Post all your reflex and bandpass and 'other' boxes with holes in stuff here...
URL: https://forum.speakerplans.com/forum_posts.asp?TID=109087
Printed Date: 26 March 2026 at 5:30pm
Software Version: Web Wiz Forums 12.08 - https://www.webwizforums.com


Topic: DYNACORD SUB800A upgrade?
Posted By: d.antonis
Subject: DYNACORD SUB800A upgrade?
Date Posted: 22 May 2025 at 11:15am
This sub came to my hands recently. It's woofer is the Electro-Voice DL15Y. One of the two cone wires was cut off the cone. fortunately i managed to solder it in place, put glue on both wires, so the woofer was saved and works fine. Is there a drop-in replacement to upgrade this sub? I repeat, it works very good, but it has rather low x-max and thin paper cone. I haven't test it hard yet. Another question that i have is, if this woofer is for sub duty only, or was it used for midbass duties in 2-way dynacord/electrovoice speakers? Thanks in advance.....







Replies:
Posted By: d.antonis
Date Posted: 22 May 2025 at 11:16am



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.08 - https://www.webwizforums.com
Copyright ©2001-2026 Web Wiz Ltd. - https://www.webwiz.net