Robe 575XT Gobo issue

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   They are usually an easy fix, with many faults as listed above.

A cost is a hard one as it could be as little as hall effect IC re-alignment, or stepper motor, stepper control i.c. and faulty interconnects. Had them all. Ususally as a result of the fan being clogged up, smoke shite and crap everywhere. In a bad case I wash them out after a carefull air line clean out outside wearing a mask and goggles!! I've had them near full solid of muck and dust before and still got all to work, so they should be an easy fix.

Personally I find Robe crap to deal with and stupidly expensive. They have no component level engineers.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Muckerbarnes1 Members Profile Send Private Message Find Members Posts Add to Buddy List Old Croc Joined: 20 March 2010 Location: Stroud Status: Offline Points: 2637	Post Options Post Reply Quote Muckerbarnes1 Report Post Thanks(0) Quote Reply Posted: 23 November 2010 at 12:23am
	They are usually an easy fix, with many faults as listed above. A cost is a hard one as it could be as little as hall effect IC re-alignment, or stepper motor, stepper control i.c. and faulty interconnects. Had them all. Ususally as a result of the fan being clogged up, smoke shite and crap everywhere. In a bad case I wash them out after a carefull air line clean out outside wearing a mask and goggles!! I've had them near full solid of muck and dust before and still got all to work, so they should be an easy fix. Personally I find Robe crap to deal with and stupidly expensive. They have no component level engineers.
	Billy Dawg.